*Free shipping on orders over $150 in Canada.

Manufacturer: Misc

Product #: 85000240

Qty:

Availability: In stock (Only 102 left)

*Price: $9.99/each

*For confirmation of inventory availablity, please contact us at 905-669-7448

Safety Data Sheet	 	
 
 	
 	
Revision Number	: 005	.0 	Issue date	: 02/07/2019	 	
 
IDH number	: 1403221	 	Product name	: LePage	® PL Premium 100% Polyurethane Construction Adhesive	 	Page	 1 of 6 	
 	
1.  PRODUCT AND COMPANY IDENTIFICATION	 	
 Product name	: 	LePage	® PL Premium 100% 	Polyurethane Construction Adhesive	  	IDH number	: 	1403221	 	
Product type/use	: 	1-component	-polyurethane adhesive	 	 	 	Restriction of Use:	 	None identified	 	Region:	 	United States	 	Company address:	 	Contact information:	 	Henkel Corporation	 	One Henkel Way	 	Rocky Hill, Connecticut	 06067	 	
Telephone	: +1 (860) 571	-5100	 	MEDICAL EMERGENCY Phone: Poison Control Center                    1-877	-671	-4608 (toll free) or 1	-303	-592	-1711                  	TRANSPORT EMERGENCY Phone: CHEMTREC                             1-800	-424	-9300 (toll free) or 1	-703	-527	-3887                    	       	Internet: www.henkelna.com	 	 	
2.  HAZARDS IDENTIFI	CATION	 	
  	EMERGENCY OVERVIEW	 	 	
DANGER	: 	CAUSES SKIN IRRITATI	ON.	 	
MAY CAUSE AN ALLERGI	C SKIN REACTION.	 	
CAUSES SERIOUS EYE I	RRITATION.	 	
MAY CAUSE ALLERGY OR	 ASTHMA SYMPTOMS OR B	REATHING 	
DIFFICULTIES IF INHA	LED.	 	
MAY CAUSE RESPIRATOR	Y IRRITATION.	 	
CAUSES DAMAGE TO ORG	ANS THROUGH PROLONGE	D OR REPEATED 	
EXPOSURE.	 	
 
 	HAZARD CLASS	 	HAZARD CATEGORY	 	SKIN IRRITATION	  	2 	EYE IRRITATION	  	2A 	RESPIRATORY SENSITIZ	ATION	  	1 	SKIN SENSITIZATION	  	1 	SPECIFIC TARGET ORGA	N TOXICITY 	- SINGLE EXPOSURE	  	3 	SPECIFIC TARGET ORGA	N TOXICITY 	- REPEATED EXPOSURE	  	1 	 	PICTOGRAM(S)	 	
 	
 Precautionary Statements	 	 	Prevention:	 	Do not breathe dust or fumes.	 Wash affected area thoroughly after handling.	 Do not eat, drink 	or smoke when using this product.	 Use only outdoors or in a well	-ventilated area.	 Contaminated 	work clothing should not be allowed out of the workplace.	 Wear protective gloves, eye 	protection, and	 face protection.	 In case of inadequate ventilation wear respiratory protection.	 	Response:	 	IF ON SKIN: Wash with plenty of water.	 IF INHALED: Remove victim to fresh air and keep at 	rest in a posit	ion comfortable for breathing. Call a POISON CENTER or physician if you feel 	unwell.	 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if 	present and easy to do. Continue rinsing.	 If skin irrita	tion or rash occurs: Get medical attention.	 	If eye irritation persists: Get medical attention.	 If experiencing respiratory symptoms: Call a 	poison center or physician.	 Take off contaminated clothing.	 	Storage:	 	Store in a well	-ventilated place. Keep container tightly closed.	 Store locked up.	   
 
 
 
IDH number	: 1403221	 	Product name	: LePage	® PL Premium 100% Polyurethane Construction Adhesive	 	Page	 2 of 6 	
 	
Disposal:	 	Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.	  	
  Classification complies with OSHA Hazard Communication Standard (29 CFR 1910.1200) and is consistent with the provisions of t	he 	United Nations Globally Harmonized System of Classification and Labeling of Chemicals (GHS).	 	 	See Section 11 for additional toxicological information.	 	 	
3.  COMPOSITION / IN	FORMATION ON INGREDI	ENTS	 	
 Hazardous Component(s)	 	CAS Number	 	Percentage*	 	
Talc	 	14807	-96-6 	>= 40 - < 50 	
Methylenebis(phenylisocyanate)	 	101	-68-8 	>= 10 - < 20 	
Hydrocarbon C11	-25 dearomatized	 	64742	-46-7 	1 - 5 	
Methylene bisphenyl isocyanate	 	26447	-40-5 	1 - 5 	
  * Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate pr	otections.	 	  	
4.  FIRST AID MEASUR	ES	 	
 	Inhalation:	 	If inhaled, immediately remove the affected person to fresh air.	 Immediate 	medical treatment necessary.	  	 	Skin contact:	 	Wash affected area immediately with soap and water.	 If symptoms develop 	and persist, get medical attention.	 Remove contaminated clothes.	  	 	Eye contact:	 	In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.	  	 	Ingestion:	 	Do not induce vomiting.	 Rinse the mouth. Drink plenty of water. Immedi	ate 	medical advice necessary.	  	 	Symptoms:	 	See Section 11.	 	 	Notes to physician:	 	An individual having a dermal or pulmonary sensitization reaction to this material should be removed from further exposure to any diisocyanate.	Treatment based on judgement of the physician in response to 	reactions of the patient.	 	 	
5.  FIRE FIGHTING ME	ASURES	 	
 	Extinguishing media:	 	Water fog.	 Foam	 Carbon dioxide.	   	 	Special firefighting procedures	: 	Wear self	-contained breathing apparatus and full protective clothing, such as 	turn	-out gear.	 In case of fire, keep containers cool with water spray.	  	 	Unusual fire or explosion hazards:	 	None known.	  	 	Hazardous combustion products	: 	Nitrous gases Irritating fumes. Isocyanate vapors.	 	 	
6.  ACCIDENTAL RELEA	SE MEASURES	 	
 Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.	 	 	Environmental precautions:	 	Do not empty into drains / surface water / ground water.	  	   
 
 
 
IDH number	: 1403221	 	Product name	: LePage	® PL Premium 100% Polyurethane Construction Adhesive	 	Page	 3 of 6 	
 	
Clean	-up methods:	 	Ensure adequate ventilation.	 Scrape up spilled material and place in a closed 	container for disposal.	 Wear suitable protective clothing, gloves and eye/face 	protection.	  	
 	
7.  HANDLING AND STO	RAGE	 	
 	Handling:	 	Avoid contact with eyes, skin and clothing.	 Avoid extreme temperatures.	 	Exposure to vapors of heated MDI can be extremely dangerous.	 Wash 	thoroughly after handling.	 Protect from moisture.	 Use only with adequate 	ventilation.	  	 	Storage:	 	For safe storage, store between	 15 	°C (59	°F) and	 30 	°C (86	°F) 	Avoid moisture.	 Keep in a cool, well ventilated area away from heat, sparks 	and open flame. Keep container tightly closed until ready for use.	  	 	For information on product shelf life, please review labels on container or check the Technical Data Sheet.	 	 	
8.  EXPOSURE CONTROL	S / PERSONAL PROTECT	ION	 	
 Employers should complete an assessment of all workplaces to determine the need for, and selection of, proper exposure controls and protective equipment for each task performed.	 	 Hazardous Component(s)	 	ACGIH TLV	 	OSHA PEL	 	AIHA WEEL	 	OTHER	 	
Talc	 	2 mg/m3	 TWA	 	Respirable fraction.	 	
0.1 mg/m3	 TWA	 	Respirable.	 	2.4	 MPPCF	 TWA	 	Respirable.	 	20 MPPCF	 TWA	 	
None	 	50 ppm	   	
Methylenebis(phenylisocyanate)	 	0.005 ppm	 TWA	 	0.02 ppm	 (0.2 	mg/m3	) Ceiling	 	None	 	None	 	
Hydrocarbon C11	-25 dearomatized	 	5 mg/m3	 TWA	 	Inhalable fraction.	 	5 mg/m3	 PEL	 Mist.	 	None	 	None	 	
Methylene bisphenyl isocyanate	 	None	 	None	 	None	 	None	 	
 	Engineering controls:	 	Local exhaust ventilation is recommended when general ventilation is not sufficient to control airborne contamination below occupational exposure limits.	  	 	Respiratory protection:	 	Observe OSHA regulations for respirator use (29 CFR 1910.134).	 Use a 	NIOSH approved air	-purifying respirator if the potential to exceed established 	exposure limits exists.	 Respirator with combination filter fo	r vapor/particulate.	 	However, due to the poor warning properties of MDI, proper fit and timely replacement of filter elements must be ensured.	  	 	Eye/face protection:	 	Safety glasses with side	-shields.	 Full face pro	tection should be used if the 	potential for splashing or spraying of product exists.	  	 	Skin protection:	 	Suitable protective clothing	  	 	
9.  PHYSICAL AND CHE	MICAL PROPERTIES	 	
 	Physical state:	 	Highly viscous, Solid	 	Color:	 	Tan	 	Odor:	 	Mild	 	Odor threshold:	 	Not available.	 	pH	: 	Neutral, Weakly, Alkaline	 	Vapor pressure	: 	Not available.	 	Boiling point/range	: 	172 	- 341 	°C (341.6 	- 645.8 	°F)no method	  	Melting point/ range	: 	Not applicable	 	Specific gravity	: 	1.294 	- 1.378	  	Vapor density:	 	Heavier than air	 	Flash point	:  	> 93.34 	°C (> 200.01 	°F)  	Flammable/Explosive limits 	- lower	: 	1.6	 %  	Flammable/Explosive limits 	- upper	: 	10.2	 %    
 
 
 
IDH number	: 1403221	 	Product name	: LePage	® PL Premium 100% Polyurethane Construction Adhesive	 	Page	 4 of 6 	
 	
Autoignition temperature	: 	No information available.	 	Flammability	: 	Not applicable	 	Evaporation rate:	 	Not available.	 	Solubility in water	: 	Slightly soluble	  	Partition coefficient (n	-octanol/water):	 	Not available.	 	VOC content	: 	< 3 %	; 76 g/l	 (by weight, calculated using CARB method; g/L less water, less 	exempts calculated using SCAQMD method)	 	Viscosity	: 	Not available.	 	Decomposition temperature:	 	Not available.	 	 	
10.  STABILITY AND R	EACTIVITY	 	
 	Stability	: 	Stable under normal conditions of storage and use.	 	 	Hazardous reactions	: 	Contact with moisture, other materials that react with isocyanates, or temperatures above 350	° 	F (177	° C), may cause polymerization.	  	 	Hazardous decomposition products:	 	Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition.	 	nitrogen oxides	 Aromatic isocyanates.	 carbon oxides.	   	 	Incompatible materials:	 	Oxidizing agents.	 Alcohols.	 Water.	  	 	Reactivity:	 	Not available.	 	 	Conditions to avoid:	 	Avoid moisture.	 Keep away from open flames, hot surfaces and sources of ignition.	 Prolonged 	exposure to heat.	  	 	
11.  TOXICOLOGICAL I	NFORMATION	 	
 	Relevant routes of exposure:	 	Inhalation, Skin, Eyes, Ingestion	 	  	Potential Health Effects/Symptoms	 	 	Inhalation:	 	As a result of previous repeated overexposures or a single large dose, certain individuals will develop isocyanate sensitization (chemical asthma) which will cause them to react to a later exposure to isocyanate at levels well below the TLV. Chronic overex	posure to isocyanates has 	been reported to cause lung damage.	 Dryness of nasal passages, sore throat, cough, tightness 	of chest, shortness of breath.	 Persons suffering from allergic reactions to isocyanates should 	avoid contact with the product.	 This product may cause sensitization by inhalation and skin 	contact.	 May cause respiratory tract irritation.	 	Skin contact:	 	Contact with skin can cause irritation and allergic reaction (sensitization) in some individuals.	 	This product may discolor the skin.	 	Eye contact:	 	Contact with eyes will cause irritation.	  	Ingestion:	 	Ingestion of this product may cause nausea, vomiting and diarrhea.	  	 	 	Hazardous Component(s)	 	LD50s and LC50s	 	Immediate and Delayed Health Effects	 	
Talc	 	None	 	Irritant	, Lung, Some evidence of carcinogenicity	 	Methylenebis(phenylisocyanate)	 	Inhalation LC50	 (Rat	, 4 h	) = 0.38 mg/l	 	Irritant	, Respiratory, Allergen	 	Hydrocarbon C11	-25 dearomatized	 	None	 	Irritant	 	Methylene bisphenyl isocyanate	 	None	 	Allergen	, Irritant, Mutagen, Respiratory	 	 	
Hazardous Component(s)	 	NTP Carcinogen	 	IARC Carcinogen	 	OSHA Carcinogen	 	
(Specifically Regulated)	 	
Talc	 	No	 	Group	 2B 	No	 	Methylenebis(phenylisocyanate)	 	No	 	No	 	No	 	Hydrocarbon C11	-25 dearomatized	 	No	 	No	 	No	 	Methylene bisphenyl isocyanate	 	No	 	No	 	No	 	   
 
 
 
IDH number	: 1403221	 	Product name	: LePage	® PL Premium 100% Polyurethane Construction Adhesive	 	Page	 5 of 6 	
 	
12.  ECOLOGICAL INFO	RMATION	 	
 	Ecological information:	 	Not available.	 	 	
13.  DISPOSAL CONSID	ERATIONS	 	
 	Information provided is for unused product only.	 	 	Recommended method of disposal:	 	Dispose of according to Federal, State and local governmental regulations.	  	 	Hazardous waste number	:  	It is the	 responsibility of the user to determine if an item is hazardous as 	defined in the Resource Conservation and Recovery Act (RCRA) at the time of disposal.  Product uses, transformations, mixtures, processes, etc., may render the resulting material hazardous	, under the criteria of ignitability, 	corrosivity, reactivity and toxicity characteristics of the Toxicity Characteristics Leaching Procedure (TCLP) 40 CFR 261.20	-24.	  	 	
14.  TRANSPORT INFOR	MATION	 	
 The transport information provided in this section only applies to the material/formulation itself, and is not specific to an	y 	package/configuration.	 	 U.S. Department of Transportation Ground (49 CFR)	 	Proper shipping name:	 	Not regulated	 	Hazard class or division:	 	None	 	Identification number:	 	None	 	Packing group:	 	None	 	 	International Air Transportation (ICAO/IATA)	 	Proper shipping name:	 	Not regulated	 	Hazard class or division:	 	None	 	Identification number:	 	None	 	Packing group:	 	None	 	 	Water Transportation (IMO/IMDG)	 	Proper shipping name:	 	Not regulated	 	Hazard class or division:	 	None	 	Identification number:	 	None	 	Packing group:	 	None	 	 	
15.	  REGULATORY INFORMATI	ON	 	
 United States Regulatory Information	 	 	TSCA 8 (b) Inventory Status:	 	All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory.	 	TSCA 12 (b) Export Notification:	 	None above reporting de minimis	 	 	CERCLA/SARA Section 302 EHS	: 	None above reporting de minimis.	 	CERCLA/SARA Section 311/312:	 	Immediate Health, Delayed Health	  	CERCLA/SARA Section 313:	 	This product contains the following toxic chemicals subject to the reporting requirements of section 313  of the Emergency Planning and Community Right	-To-Know Act of 1986 (40 	CFR 372).	 Methylenebis(phenylisocyanate)	 (CAS# 	101	-68-8).  	 	California Proposition 65:	  	No California Proposition 65 listed chemicals are known to be present.	  	  Canada Regulatory Information	 	 	CEPA DSL/NDSL Status:	  	All components are listed on or are exempt from listing on the Canadian Domestic Substances List.	 	   
 
 
 
IDH number	: 1403221	 	Product name	: LePage	® PL Premium 100% Polyurethane Construction Adhesive	 	Page	 6 of 6 	
 	
16.  OTHER INFORMATI	ON	 	
 	This safety data sheet contains changes from the previous version in sections:	 This Safety Data Sheet contains changes 	from the previous version in Section(s):	 9 	 	Prepared by:	 	Product Safety and Regulatory Affairs	 	 	Issue date	: 	02/07/2019	 	 	DISCLAIMER:	 The data contained herein are furnished for information only and are believed to be reliable. However, Henkel 	Corporation and its affiliates (	“Henkel	”) does not assume responsibility for any results obtained by persons over whose methods 	Henkel has no control. It is the user	’s responsibility to determine the suitability of Henkel	’s products or any production methods 	mentioned herein for a particular pur	pose, and to adopt such precautions as may be advisable for the protection of property and 	persons against any hazards that may be involved in the handling and use of any Henkel	’s products. In light of the foregoing, 	Henkel specifically disclaims all warra	nties, express or implied, including warranties of merchantability and fitness for a particular 	purpose, arising from sale or use of Henkel	’s products. Henkel further disclaims any liability for consequential or incidental damages 	of any kind, including lo	st profits.	 	 This Safety Data Sheet has been generated based on OSHA Hazard Communication Standard (29 CFR 1910.1200) and provides information in accordance with U.S. federal law only.  No warranty or representation of any kind is given with respect to the	 	substantive or export laws of any other jurisdiction or country.  Please confirm that the information provided herein conform	s to the 	substantive export or other law of any other jurisdiction prior to export.  Please contact Henkel Product Safety and Regu	latory 	Affairs for additional assistance.

LePage PL Premium is a one component, polyurethane based, moisture-curing adhesive that provides superior adhesion to most common construction materials.

It is VOC compliant and contains no chlorinated solvents or water. It may be used inside or outside and will last as long as the surfaces it joins together. Since the bonding strength of PL Premium is so strong, it offers twice the coverage of conventional adhesives therefore much less adhesive is required to complete projects. PL Premium is 3 times stronger than ordinary solvent based construction adhesives during initial 24 hour cure. It is also waterproof, paintable and cures even in cold temperatures. Ideal for subfloor installations.

  • Water Resistant
  • Twice the Coverage
  • Long Open Time
  • Extended Repositioning Time
  • Non-Shrinking
  • Paintable

Related Products

Sign Up for Our Newsletter to Receive Exclusive Updates

  • This field is for validation purposes and should be left unchanged.

Processing your order..