1-800-668-6636

1-800-668-6636

sales@fasteninghouse.com

0 0
*Free shipping on orders over $150 in Canada.

PL PREMIUM CONSTR.ADHES.295ML

Manufacturer: Misc

Product #: 85000240

Qty:

Availability: In stock (Only 222 left)

*Price: $10.73/each

*For confirmation of inventory availablity, please contact us at 905-669-7448

Safety Data Sheet Revision Number : 005 .0 Issue date : 02/07/2019 IDH number : 1403221 Product name : LePage ® PL Premium 100% Polyurethane Construction Adhesive Page 1 of 6 1. PRODUCT AND COMPANY IDENTIFICATION Product name : LePage ® PL Premium 100% Polyurethane Construction Adhesive IDH number : 1403221 Product type/use : 1-component -polyurethane adhesive Restriction of Use: None identified Region: United States Company address: Contact information: Henkel Corporation One Henkel Way Rocky Hill, Connecticut 06067 Telephone : +1 (860) 571 -5100 MEDICAL EMERGENCY Phone: Poison Control Center 1-877 -671 -4608 (toll free) or 1 -303 -592 -1711 TRANSPORT EMERGENCY Phone: CHEMTREC 1-800 -424 -9300 (toll free) or 1 -703 -527 -3887 Internet: www.henkelna.com 2. HAZARDS IDENTIFI CATION EMERGENCY OVERVIEW DANGER : CAUSES SKIN IRRITATI ON. MAY CAUSE AN ALLERGI C SKIN REACTION. CAUSES SERIOUS EYE I RRITATION. MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR B REATHING DIFFICULTIES IF INHA LED. MAY CAUSE RESPIRATOR Y IRRITATION. CAUSES DAMAGE TO ORG ANS THROUGH PROLONGE D OR REPEATED EXPOSURE. HAZARD CLASS HAZARD CATEGORY SKIN IRRITATION 2 EYE IRRITATION 2A RESPIRATORY SENSITIZ ATION 1 SKIN SENSITIZATION 1 SPECIFIC TARGET ORGA N TOXICITY - SINGLE EXPOSURE 3 SPECIFIC TARGET ORGA N TOXICITY - REPEATED EXPOSURE 1 PICTOGRAM(S) Precautionary Statements Prevention: Do not breathe dust or fumes. Wash affected area thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well -ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves, eye protection, and face protection. In case of inadequate ventilation wear respiratory protection. Response: IF ON SKIN: Wash with plenty of water. IF INHALED: Remove victim to fresh air and keep at rest in a posit ion comfortable for breathing. Call a POISON CENTER or physician if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irrita tion or rash occurs: Get medical attention. If eye irritation persists: Get medical attention. If experiencing respiratory symptoms: Call a poison center or physician. Take off contaminated clothing. Storage: Store in a well -ventilated place. Keep container tightly closed. Store locked up. IDH number : 1403221 Product name : LePage ® PL Premium 100% Polyurethane Construction Adhesive Page 2 of 6 Disposal: Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations. Classification complies with OSHA Hazard Communication Standard (29 CFR 1910.1200) and is consistent with the provisions of t he United Nations Globally Harmonized System of Classification and Labeling of Chemicals (GHS). See Section 11 for additional toxicological information. 3. COMPOSITION / IN FORMATION ON INGREDI ENTS Hazardous Component(s) CAS Number Percentage* Talc 14807 -96-6 >= 40 - < 50 Methylenebis(phenylisocyanate) 101 -68-8 >= 10 - < 20 Hydrocarbon C11 -25 dearomatized 64742 -46-7 1 - 5 Methylene bisphenyl isocyanate 26447 -40-5 1 - 5 * Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate pr otections. 4. FIRST AID MEASUR ES Inhalation: If inhaled, immediately remove the affected person to fresh air. Immediate medical treatment necessary. Skin contact: Wash affected area immediately with soap and water. If symptoms develop and persist, get medical attention. Remove contaminated clothes. Eye contact: In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention. Ingestion: Do not induce vomiting. Rinse the mouth. Drink plenty of water. Immedi ate medical advice necessary. Symptoms: See Section 11. Notes to physician: An individual having a dermal or pulmonary sensitization reaction to this material should be removed from further exposure to any diisocyanate. Treatment based on judgement of the physician in response to reactions of the patient. 5. FIRE FIGHTING ME ASURES Extinguishing media: Water fog. Foam Carbon dioxide. Special firefighting procedures : Wear self -contained breathing apparatus and full protective clothing, such as turn -out gear. In case of fire, keep containers cool with water spray. Unusual fire or explosion hazards: None known. Hazardous combustion products : Nitrous gases Irritating fumes. Isocyanate vapors. 6. ACCIDENTAL RELEA SE MEASURES Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel. Environmental precautions: Do not empty into drains / surface water / ground water. IDH number : 1403221 Product name : LePage ® PL Premium 100% Polyurethane Construction Adhesive Page 3 of 6 Clean -up methods: Ensure adequate ventilation. Scrape up spilled material and place in a closed container for disposal. Wear suitable protective clothing, gloves and eye/face protection. 7. HANDLING AND STO RAGE Handling: Avoid contact with eyes, skin and clothing. Avoid extreme temperatures. Exposure to vapors of heated MDI can be extremely dangerous. Wash thoroughly after handling. Protect from moisture. Use only with adequate ventilation. Storage: For safe storage, store between 15 °C (59 °F) and 30 °C (86 °F) Avoid moisture. Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. For information on product shelf life, please review labels on container or check the Technical Data Sheet. 8. EXPOSURE CONTROL S / PERSONAL PROTECT ION Employers should complete an assessment of all workplaces to determine the need for, and selection of, proper exposure controls and protective equipment for each task performed. Hazardous Component(s) ACGIH TLV OSHA PEL AIHA WEEL OTHER Talc 2 mg/m3 TWA Respirable fraction. 0.1 mg/m3 TWA Respirable. 2.4 MPPCF TWA Respirable. 20 MPPCF TWA None 50 ppm Methylenebis(phenylisocyanate) 0.005 ppm TWA 0.02 ppm (0.2 mg/m3 ) Ceiling None None Hydrocarbon C11 -25 dearomatized 5 mg/m3 TWA Inhalable fraction. 5 mg/m3 PEL Mist. None None Methylene bisphenyl isocyanate None None None None Engineering controls: Local exhaust ventilation is recommended when general ventilation is not sufficient to control airborne contamination below occupational exposure limits. Respiratory protection: Observe OSHA regulations for respirator use (29 CFR 1910.134). Use a NIOSH approved air -purifying respirator if the potential to exceed established exposure limits exists. Respirator with combination filter fo r vapor/particulate. However, due to the poor warning properties of MDI, proper fit and timely replacement of filter elements must be ensured. Eye/face protection: Safety glasses with side -shields. Full face pro tection should be used if the potential for splashing or spraying of product exists. Skin protection: Suitable protective clothing 9. PHYSICAL AND CHE MICAL PROPERTIES Physical state: Highly viscous, Solid Color: Tan Odor: Mild Odor threshold: Not available. pH : Neutral, Weakly, Alkaline Vapor pressure : Not available. Boiling point/range : 172 - 341 °C (341.6 - 645.8 °F)no method Melting point/ range : Not applicable Specific gravity : 1.294 - 1.378 Vapor density: Heavier than air Flash point : > 93.34 °C (> 200.01 °F) Flammable/Explosive limits - lower : 1.6 % Flammable/Explosive limits - upper : 10.2 % IDH number : 1403221 Product name : LePage ® PL Premium 100% Polyurethane Construction Adhesive Page 4 of 6 Autoignition temperature : No information available. Flammability : Not applicable Evaporation rate: Not available. Solubility in water : Slightly soluble Partition coefficient (n -octanol/water): Not available. VOC content : < 3 % ; 76 g/l (by weight, calculated using CARB method; g/L less water, less exempts calculated using SCAQMD method) Viscosity : Not available. Decomposition temperature: Not available. 10. STABILITY AND R EACTIVITY Stability : Stable under normal conditions of storage and use. Hazardous reactions : Contact with moisture, other materials that react with isocyanates, or temperatures above 350 ° F (177 ° C), may cause polymerization. Hazardous decomposition products: Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. nitrogen oxides Aromatic isocyanates. carbon oxides. Incompatible materials: Oxidizing agents. Alcohols. Water. Reactivity: Not available. Conditions to avoid: Avoid moisture. Keep away from open flames, hot surfaces and sources of ignition. Prolonged exposure to heat. 11. TOXICOLOGICAL I NFORMATION Relevant routes of exposure: Inhalation, Skin, Eyes, Ingestion Potential Health Effects/Symptoms Inhalation: As a result of previous repeated overexposures or a single large dose, certain individuals will develop isocyanate sensitization (chemical asthma) which will cause them to react to a later exposure to isocyanate at levels well below the TLV. Chronic overex posure to isocyanates has been reported to cause lung damage. Dryness of nasal passages, sore throat, cough, tightness of chest, shortness of breath. Persons suffering from allergic reactions to isocyanates should avoid contact with the product. This product may cause sensitization by inhalation and skin contact. May cause respiratory tract irritation. Skin contact: Contact with skin can cause irritation and allergic reaction (sensitization) in some individuals. This product may discolor the skin. Eye contact: Contact with eyes will cause irritation. Ingestion: Ingestion of this product may cause nausea, vomiting and diarrhea. Hazardous Component(s) LD50s and LC50s Immediate and Delayed Health Effects Talc None Irritant , Lung, Some evidence of carcinogenicity Methylenebis(phenylisocyanate) Inhalation LC50 (Rat , 4 h ) = 0.38 mg/l Irritant , Respiratory, Allergen Hydrocarbon C11 -25 dearomatized None Irritant Methylene bisphenyl isocyanate None Allergen , Irritant, Mutagen, Respiratory Hazardous Component(s) NTP Carcinogen IARC Carcinogen OSHA Carcinogen (Specifically Regulated) Talc No Group 2B No Methylenebis(phenylisocyanate) No No No Hydrocarbon C11 -25 dearomatized No No No Methylene bisphenyl isocyanate No No No IDH number : 1403221 Product name : LePage ® PL Premium 100% Polyurethane Construction Adhesive Page 5 of 6 12. ECOLOGICAL INFO RMATION Ecological information: Not available. 13. DISPOSAL CONSID ERATIONS Information provided is for unused product only. Recommended method of disposal: Dispose of according to Federal, State and local governmental regulations. Hazardous waste number : It is the responsibility of the user to determine if an item is hazardous as defined in the Resource Conservation and Recovery Act (RCRA) at the time of disposal. Product uses, transformations, mixtures, processes, etc., may render the resulting material hazardous , under the criteria of ignitability, corrosivity, reactivity and toxicity characteristics of the Toxicity Characteristics Leaching Procedure (TCLP) 40 CFR 261.20 -24. 14. TRANSPORT INFOR MATION The transport information provided in this section only applies to the material/formulation itself, and is not specific to an y package/configuration. U.S. Department of Transportation Ground (49 CFR) Proper shipping name: Not regulated Hazard class or division: None Identification number: None Packing group: None International Air Transportation (ICAO/IATA) Proper shipping name: Not regulated Hazard class or division: None Identification number: None Packing group: None Water Transportation (IMO/IMDG) Proper shipping name: Not regulated Hazard class or division: None Identification number: None Packing group: None 15. REGULATORY INFORMATI ON United States Regulatory Information TSCA 8 (b) Inventory Status: All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory. TSCA 12 (b) Export Notification: None above reporting de minimis CERCLA/SARA Section 302 EHS : None above reporting de minimis. CERCLA/SARA Section 311/312: Immediate Health, Delayed Health CERCLA/SARA Section 313: This product contains the following toxic chemicals subject to the reporting requirements of section 313 of the Emergency Planning and Community Right -To-Know Act of 1986 (40 CFR 372). Methylenebis(phenylisocyanate) (CAS# 101 -68-8). California Proposition 65: No California Proposition 65 listed chemicals are known to be present. Canada Regulatory Information CEPA DSL/NDSL Status: All components are listed on or are exempt from listing on the Canadian Domestic Substances List. IDH number : 1403221 Product name : LePage ® PL Premium 100% Polyurethane Construction Adhesive Page 6 of 6 16. OTHER INFORMATI ON This safety data sheet contains changes from the previous version in sections: This Safety Data Sheet contains changes from the previous version in Section(s): 9 Prepared by: Product Safety and Regulatory Affairs Issue date : 02/07/2019 DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However, Henkel Corporation and its affiliates ( “Henkel ”) does not assume responsibility for any results obtained by persons over whose methods Henkel has no control. It is the user ’s responsibility to determine the suitability of Henkel ’s products or any production methods mentioned herein for a particular pur pose, and to adopt such precautions as may be advisable for the protection of property and persons against any hazards that may be involved in the handling and use of any Henkel ’s products. In light of the foregoing, Henkel specifically disclaims all warra nties, express or implied, including warranties of merchantability and fitness for a particular purpose, arising from sale or use of Henkel ’s products. Henkel further disclaims any liability for consequential or incidental damages of any kind, including lo st profits. This Safety Data Sheet has been generated based on OSHA Hazard Communication Standard (29 CFR 1910.1200) and provides information in accordance with U.S. federal law only. No warranty or representation of any kind is given with respect to the substantive or export laws of any other jurisdiction or country. Please confirm that the information provided herein conform s to the substantive export or other law of any other jurisdiction prior to export. Please contact Henkel Product Safety and Regu latory Affairs for additional assistance.

LePage PL Premium is a one component, polyurethane based, moisture-curing adhesive that provides superior adhesion to most common construction materials.

It is VOC compliant and contains no chlorinated solvents or water. It may be used inside or outside and will last as long as the surfaces it joins together. Since the bonding strength of PL Premium is so strong, it offers twice the coverage of conventional adhesives therefore much less adhesive is required to complete projects. PL Premium is 3 times stronger than ordinary solvent based construction adhesives during initial 24 hour cure. It is also waterproof, paintable and cures even in cold temperatures. Ideal for subfloor installations.

  • Water Resistant
  • Twice the Coverage
  • Long Open Time
  • Extended Repositioning Time
  • Non-Shrinking
  • Paintable

Related Products

MILWAUKEE M12 10OZ CAULK GUN KIT

Product #: 2441-21

View details

$ 271.40/each

Sign Up for Our Newsletter to Receive Exclusive Updates

  • This field is for validation purposes and should be left unchanged.

Processing your order..